What are the characteristics of stainless steel plates and how to choose stainless steel plates?

发布时间：2024-03-19

Introduction to the characteristics of stainless steel plates:
1. Stainless steel plate has low hardness, easy processing, and good ductility.
2. Stainless steel plates have relatively low strength and poor surface quality (with oxidation and low surface finish), but they have good plasticity and are generally medium thick plates. Cold rolled plates have high strength and hardness, and high surface finish. They are generally thin plates and can be used as stamping plates.
3. The mechanical properties of stainless steel plates are far inferior to cold processing and forging processing, but they have good toughness and ductility.
4. Stainless steel plates can withstand temperatures of 200 ℃, and colored stainless steel plates have better salt spray corrosion resistance than ordinary stainless steel. The wear resistance and scratch resistance of stainless steel plates are equivalent to the performance of gold coating on the foil layer.
How to choose stainless steel plates
1. Stainless steel plates should first have good corrosion resistance, and we should consider the application of stainless steel plates to determine whether they are corroded according to specific requirements and detailed specifications.
2. The corrosion resistance of stainless steel plates is relative. The commonly referred to corrosion resistance, rust prevention, and corrosion resistance of stainless steel plates refer to the necessary conditions (culture medium, impurities, pressure, concentration, temperature, speed, and other factors), rather than corrosion without rust in any environment.
3. When choosing stainless steel plates, the first consideration is corrosion resistance, as material research usually focuses on the corrosion resistance function of stainless steel.
4. Stainless steel equipment, if components fail due to corrosion, should be cut and analyzed for corrosion damage. This is the method taken after discovery.
5. When bent at 90 ℃, stainless steel plates can be used for decoration purposes such as hall wall panels, ceilings, elevator panels, car trunk panels, building decorations, and signs.
The above are the characteristics of stainless steel plates, and a detailed introduction has been made on how to choose stainless steel plates. After understanding this, we will have a better understanding of the importance of selecting stainless steel plates correctly. Only by selecting suitable stainless steel plates and high-quality products can we save costs and improve application efficiency as a whole.